Publications
204 document(s) found.I.Kroo, F.Prinz, R. Leitgeb, Y.L. Cheng, "The Mesicopter: A Meso-Scale Flight Vehicle, NIAC Phase I Final Report, 1999".
G. Link, T. Huntley, A. Nickel, R. Leitgeb, T. Nguyen and F.B. Prinz, "Reducing part deformation by inducing phase transformation, Proc. Solid Freeform Fabrication Symposium, pp 727-734, University of Texas at Austin, Austin, Texas, 1999.".
J. Dong, J.H. Kao, J.M. Pinilla, Y.C. Chang and F.B. Prinz, "Automated planning for material shaping operations in additive/subtractive Solid Freeform Fabrication, Proc. Solid Freeform Fabrication Symposium, pp 121-128, University of Texas at Austin, Austin, Texas, 1999.".
Y.C. Chang, J.M. Pinilla, J.H. Kao, J. Dong, K. Ramaswami, and F.B. Prinz, "Automated Layer Decomposition for Additive/Subtractive Solid Freeform Fabrication, Proc. Solid Freeform Fabrication Symposium, pp 111-120, University of Texas at Austin, Austin, Texas, 1999.".
J. M. Pinilla, F. B. Prinz, "Performance of a Shape Deposition Manufacturing Cell, , Submitted to DETC 1999, Las Vegas, Sept 1999.".
Y.L. Cheng, J. Stampfl, R. Leitgeb, F. Prinz, "Additive/Subtractive material processing for mesoscopic parts, Proc. Solid Freeform Fabrication Symposium, pp 687-694, University of Texas at Austin, Austin, Texas, August 1999".
S. Kang, A. G. Cooper, J. Stampfl, F. Prinz, J. Lombardi, L. Weiss, J.Sherbeck, "Fabrication of high quality ceramic parts using Mold SDM, Proc. Solid Freeform Fabrication Symposium, pp 427-434, University of Texas at Austin, Austin, Texas, August 1999.".
X.C. Li, J. Stampfl, F.B. Prinz, "Design and fabrication of materials for Laser Shape Deposition Manufacturing, 44th International SAMPE Symposium, L.J.Cohen et al. (eds), Long Beach, Vol 44(2) pp1849-1856, May 1999".
J. Stampfl, R. Leitgeb, Y.L. Cheng, F.B. Prinz, "Mikrostrukturierung von Funktions- und Strukturwerkstoffen mittels plasmageätzten Siliziums, Werkstoffwoche 98, München, K. Kempter and J. Hausselt (Eds), pp 329-334, 1999.".
A.G. Cooper, J.M. Pinilla, J. Kao and F.B. Prinz, "Graph based process planning for Mold Shape Deposition Manufacturing, Proceedings of the 8th European Conference on Rapid Prototyping and Manufacturing, Nottingham, England, 5-7 July 1999, 153-176.".