Publications
204 document(s) found.R. O'Hayre, T. Fabian, S.Litster, F.B. Prinz and J.G. Santiago, "Engineering model of a passive planar air breathing fuel cell cathode, Journal of Power Sources, Volume 167, Issue 1, May 2007, pages 118-129 ".
W. H. Ryu, S. Min, K. Hammerick, M. Vyakarnam, R. S. Greco, F. B. Prinz, R. Fasching, "The construction of three-dimensional micro-fluidic scaffolds of biodegradable polymers by solvent vapor based bonding of micro-molded layers, Biomaterials (2007), vol.28, iss. 6, pp.1174-1184".
Hong Huang, Masafumi Nakamura, Pei-Chen Su, Rainer Fasching, Yuji Saito, and Fritz B. Prinz, "MEMS Fabrication and Performances of Nano-Thin Solid Oxide Fuel Cell", 208th ECS Meeting, 2006.
R.O'Hayre, T. Fabian, S. Litster, F.B. Prinz, J.G. Santiago, "Combined Heat and Mass Transfer Model of a Passive Air Breathing Fuel Cell Cathode, ECS Trans. 3, (1) 1125 (2006)".
T. Fabian, R. O'Hayre, S. Litster, F. B. Prinz, J.G. Santiago, "Water Management at the Cathode of a Planar Air-Breathing Fuel Cell with an Electroosmotic Pump, ECS Trans. 3, (1) 949 (2006)".
S. Kang, P. C. Su, Y. I. Park, Y. Saito, and F. B. Prinz, "Thin-Film Solid Oxide Fuel Cells on Porous Nickel Substrates with Multistage Nanohole Array
", Journal of The Electrochemical Society, vol. 153, 2006.
Yong-il Park, Pei-Chen Su, Suk Won Cha, Yuji Saito, and Fritz B. Prinz, "Thin-Film SOFCs Using Gastight YSZ Thin Films on Nanoporous Substrates", Journal of Electrochemical Society, vol. 153, 2006.
W. H. Ryu, R. Fasching, M. Vyakarnam, R. S. Greco, F. B. Prinz, "Microfabrication Technology of Biodegradable Polymers for Interconnecting Microstructures, Journal of Microelectromechanical Systems (2006), vol.15, no.6, pp.1457-1465".
Buie, Banin, Tang, Santiago, Prinz, Pruitt, "A Microfabricated Direct Methanol Fuel Cell with Integrated Electroosmotic Pump".
C.R. Buie, J.D. Posner, T. Fabian, S.W. Cha, D. Kim, F.B. Prinz, J.K. Eaton, J.G. Santiago, "Water management in proton exchange membrane fuel cells using integrated electroosmotic pumping, Journal of Power Sources, Volume 161, Issue 1, 20 October 2006, Pages 191-202".